Next-Generation Luminaire Engineering Designed for Erdenet Mining Operations, Severe Sub-Zero Climates, and High-Ceiling Industrial Complexes
Send Inquiry NowSpecially customized high-bay LED fixtures built to withstand severe physical shock, metallic copper dust, and extreme temperature drops down to -45°C.
Erdenet, located in Orkhon Province, stands as one of Mongolia's most vital economic engines. Centered around the renowned Erdenet Mining Corporation—one of the largest copper and molybdenum mining and ore-processing complexes across Eurasia—the region operates under demanding industrial stress. Heavy equipment repair shops, ore concentration facilities, crushing plants, and sprawling logistics centers operate continuously to maintain output.
Deploying industrial high bay lighting in Erdenet presents distinct engineering challenges that standard commercial fixtures cannot address:
Integrating state-of-the-art semiconductor optics, advanced thermal dissipation materials, and smart IoT control systems for resilient industrial lighting.
Utilizing premium Bridgelux and Lumileds SMD5050/3030 LED arrays paired with high-transmittance optical PC lenses, achieving luminous efficacy up to 200 lumens per watt. This delivers maximum lux at floor level while reducing energy demand by up to 70% compared to traditional HID lamps.
Custom-engineered ADC12 aluminum die-cast heat sinks coated with graphene-enhanced thermal paths. This technology rapidly channels heat away from the LED junction even during prolonged summer continuous-operation peaks, preventing lumen depreciation and extending lifespan beyond 100,000 hours (L80B10).
Equipped with specialized MeanWell and Inventronics drivers certified with 10kV surge protection and ultra-wide input voltage tolerance (180V-305V AC). Integrated low-temperature cold-start circuits ensure immediate full illumination at -45°C without flickering or startup delay.
Tailored lighting architectures optimized for specialized industrial spaces across Orkhon Province.
Heavy machinery in copper flotation and ore-crushing facilities produces immense mechanical vibration and airborne fine dust. Our high bays feature solid-state LED chips, shock-resistant tempered glass / PC optics, IK10-rated housing, and continuous silicone gaskets rated to IP66/IP69K. This seals out moisture, slurry splash, and fine particulates, eliminating short-circuits.
High-ceiling logistics warehouses require uniform vertical illuminance down narrow rack aisles. Utilizing linear high bay lights with 30°x90° or 60°x120° asymmetrical optics minimizes dark zones on shelf faces while suppressing glare for forklift drivers. Microwave motion sensors dynamically dim lighting when aisles are empty, maximizing efficiency in unheated facilities.
Food-grade industrial spaces require seamless, washdown-ready luminaires. Our specialized food-industry high bay fixtures feature smooth cast aluminum bodies without exposed screws or dust-collecting fins, preventing bacterial growth. NSF-compliant non-toxic coatings ensure safety under daily high-pressure chemical washdowns.
For fuel storage depots, chemical treatment wings, and volatile coal/powder storage facilities, our explosion-proof LED series complies with ATEX and IECEx standards. Heavy copper-free die-cast aluminum enclosures and spark-proof flamepaths isolate internal electrical sparks from explosive atmospheric gases or combustible dust.
Pioneering Global LED Manufacturing Excellence Since 1996
Yuyao Ledic Lighting Equipment Co., Ltd., established in 1996, is a recognized pioneer and high-tech manufacturer specializing in high-performance commercial and industrial LED lighting fixtures. Operating from Yuyao City, Zhejiang Province, China, Ledic Lighting has cultivated over 28 years of precision manufacturing, technological innovation, and global supply chain expertise.
Spanning a modern production footprint of 20,000 square meters, our factory is outfitted with advanced CNC precision lathes, automated high-output Zn-Al alloy die-casting machines, automated SMT surface mount lines, and complete optical sphere testing equipment. Our extensive production capabilities allow us to deliver robust OEM and ODM engineering solutions tailored precisely to clients in Erdenet and across international markets.
Every luminaire produced undergoes rigid quality assurance through our internal Quality Control (QC) Department, including IP thermal submersion testing, cold-chamber freezing burn-in, vibration testing, and photometric spectral verification. Guided by our core philosophy—"Integrity, Quality, Innovation"—Ledic Lighting provides top-tier industrial lighting solutions across Europe, the Middle East, South Asia, South America, and Central Asia.
Quantifying financial savings when retrofitting traditional High-Pressure Sodium (HPS) with Ledic High Efficiency LED Luminaires in Erdenet.
| Performance Metric | Traditional 400W HPS / MH Lamp | Ledic 200W UFO High Bay LED | Financial & Operational Advantage |
|---|---|---|---|
| System Power Consumption | 450W (Includes 50W ballast loss) | 200W Net (Power Factor >0.98) | 55.5% Direct Energy Reduction |
| Luminous Efficacy | 65 - 80 lm/W | 180 - 200 lm/W | More than 2x Lumens per Watt Efficiency |
| Operational Lifespan | 12,000 - 15,000 Hours | 100,000 Hours (L80B10) | Eliminates 6-7 Maintenance Replacement Cycles |
| Cold Start Performance | 10-15 Min Warmup Delay; Fails at -20°C | Instant-On 100% Light Output at -45°C | Zero Operational Downtime in Winter |
| Maintenance & Re-lamping Cost | High (Scissor lift / Crane rent needed) | Near Zero Maintenance Requirement | Substantial Reduction in Labor & Equipment Overhead |
| Annual Power Cost (per 100 units) | ~$19,710 USD (@ $0.10/kWh, 12h/day) | ~$8,760 USD (@ $0.10/kWh, 12h/day) | Save $10,950 USD Annually |
In typical industrial high-ceiling installations in Erdenet, payback on initial capital expenditure is achieved within 8 to 14 months of operation.
Request Customized Dialux & TCO ROI ReportSeamless cross-border freight, regulatory compliance, and dedicated technical documentation.
Our luminaires carry CE, ETL, SAA, RoHS, and ISO9001 certifications. Test reports align with IEC 60598-1 and GOST standards, streamlining customs clearance and regulatory sign-off for major EPC industrial projects in Mongolia.
We provide direct cargo logistics dispatch lines from our Yuyao factory through the Zamiin-Uud border corridor to Ulaanbaatar and onward to Erdenet. Standardized shock-absorbing export packaging prevents shipping damage during transit.
We offer full engineering consultation, including IES file photometric reports, Dialux 3D lux calculation simulations, custom mounting bracket designs, and long-term 5-year replacement warranty backing.
Expert insights regarding LED High Bay Light procurement, installation, and operation in Erdenet.
Standard LED high bay lights typically use electrolytic capacitors in their drivers that freeze, swell, or lose capacitance when ambient temperatures drop below -20°C. This leads to flickering, low output, or complete power driver failure. Ledic Lighting solves this by deploying specialized sub-zero drivers rated for solid performance down to -45°C, using wide-temperature solid-state capacitors and thermal potting compounds that maintain internal electrical stability.
For heavy dust and moisture environments like Erdenet Mining Corporation's ore handling and concentrator halls, an IP66 rating is strongly recommended. IP66 ensures that fine metallic dust and high-pressure water jets used during equipment washdowns cannot penetrate the luminaire optical or electronic chambers.
High bay fixtures mounted at 15 to 25 meters can cause severe disability glare for overhead crane operators looking upward. Our linear and UFO high bays offer specialized optical prismatic lenses (achieving UGR < 19) that diffuse direct micro-reflections, protecting crane operator vision while maintaining intense target lux on the work plane below.
Yes. Backed by our 20,000 square meter factory, CNC die-casting machinery, and in-house engineering team, we provide complete OEM and ODM customization. This includes custom voltage ranges (e.g., 347V/480V for specialized mining power systems), custom mounting hardware, Emergency Battery Backup integration, and DALI-2 / Zigbee smart lighting controls.
Standard OEM production lead times range between 15 to 25 business days depending on volume. Freight delivery from Yuyao/Ningbo via overland rail/truck route through Zamiin-Uud to Erdenet typically takes an additional 12 to 18 days. Direct factory dispatch ensures fast lead times and competitive pricing without middleman markups.
Explore our full range of heavy industrial, explosion-proof, linear, and smart UFO high bay lighting solutions.